One component pre curing thermal conductive silicon gel
ZJ-DR125 is a single component thermal conductive silicon gel, which is suitable for bonding and heat dissipation of various automotive electronic equipment, communication equipment, network terminal equipment, electronic and electrical equipment and modules.
Product features
1. One component silicon gel, without mixing and curing;
2. High thermal conductivity and low thermal resistance;
3. High surface stickiness, reworkable;
4. Soft, stress free, easy to compress;
5. Medium thickness, approximately 0.1-1mm;
6. No settlement, no flow, and can fill any uneven gap.
| Project |
ZJ-DR125 |
Testing standards |
|
Extrusion rate,mL/min |
25 |
30mL EFD syringe for gluing, pressure 621kPa |
|
Density，g/cm3 |
2.8 |
GB/T 533 |
|
Offset under different forces @ 0.0060MPa @ 0.0100MPa @ 0.0175MPa @ 0.0300MPa @ 0.0480MPa |
Shifting，% 30 40 50 60 70 |
ASTM C165 |
|
Minimum adhesive layer thickness，mm |
0.10 |
/ |
|
Thermal conductivity，W/m·K |
2.5 |
ISO 22007-2 |
|
Total mass loss Outgassing Outgassing (TML)，% |
0.12 |
ASTM E595 |
|
Specific heat capacity，J/g·K |
1 |
ASTM E1269 |
|
Working temperature，℃ |
-55~200 |
/ |
|
Volume resistivity，Ω·cm |
1×1014 |
GB/T 1692 |
| Flame retardant grade |
V0 |
UL 94 |
| RoHS standard | Conform to |
/ |
| Storage period, months |
18 |
/ |
- ZJ-DR125 is a fully cured material that does not require any curing process and can be applied through automated equipment with air supply.
- Safety instructions:
- Zhijiang ZJ-DR125 is a single component thermal conductive silicon gel, which contains neither toxic substances nor corrosive substances. Special handling precautions may be required, and general industrial hygiene regulations should be followed.
- Hazard indications/safety recommendations/transportation rules:
- Wear protective gloves for long-term or repeated contact.
- Keep away from heat sources/sparks/open flames, prohibit smoking, and keep the container closed. Use explosion-proof electrical/ventilation/lighting equipment.
- Transport according to non hazardous materials.
300mL/piece or packaged according to customer requirements
Sealed storage at room temperature, cool and ventilated conditions.