MS sealant for industrial use
ZJ-900 universal MS sealant is a high-quality, single component, paintable, and pollution resistant neutral modified sealant with good bonding performance. It reacts with moisture in the air and solidifies to form an elastomer with excellent properties such as high strength, aging resistance, vibration fatigue resistance, and low temperature corrosion resistance. JS-900 universal type can be generally used for building wall and cover plate sealing, LC plate, frame joint (inside and outside), window seal (inside and outside) waterproof joint (inside and outside), water storage and drainage structure joint, retaining wall and road separation joint, general civil construction project expansion joint, indoor decoration sealing, etc.
Product features
1. Room temperature curing, non sagging, solvent free, environmentally friendly;
2. High adhesive strength and wide adaptability of the substrate;
3. Good chemical corrosion resistance and waterproofing;
4. Outstanding weather aging resistance;
5. Excellent seismic, impact, and noise resistance;
6. Good moisture resistance and mold resistance.
| Model | ZJ-900 universal type | |
| Inspection items | Technical indicators | Lnspection standards |
|
Color |
Black, white, gray, etc |
Visualization |
| Curing method | Moisture cure |
---- |
|
Density（g/cm3） |
1.40±0.05 |
GB/T 13477.2-2017 |
|
Non volatile matter% |
≥99.5 |
GB/T 2793-1995 |
|
Sag（mm） |
0 |
GB/T 13477.6-2002 |
|
Surface drying time（mins） |
20-60 |
GB/T 13477.5-2002 |
|
Curing speed（mm/24h） |
3 |
---- |
| Curing time (humidity 50 ± 5%, temperature 23 ± 2 ℃) 3-14 days | ||
| The product is cured at a humidity of 50 ± 5% and a temperature of 23 ± 2 ℃ for 14 days: | ||
| Hardness, Shore A |
20-45 |
GB/T 531.1-2008 |
|
Constant elongation adhesion60% |
No damage |
GB/T 13477.8-2017 |
|
Elongation at break（%） |
200-600 |
GB/T 528-2009 |
|
Breaking tensile strength（MPa），≥ |
≥1.8 |
GB/T 528-2009 |
|
Pollution |
No Pollution | JC/T 881-2017 Appendix A |
- Coloring performance
- This product can be colored using traditional methods after surface drying, including epoxy resin and acrylic acid coatings. Coatings containing high solvent components such as glossy enamel or high oil based coatings can cause the adhesive surface to become soft.
- In order to achieve the best appearance and performance, the coating must be close to the tensile strength of this product. For areas with adhesive thickness less than 3mm, coloring can be carried out after 24 hours. For thicknesses greater than 3mm, coloring can be carried out after 48 hours.
- Technical Services
- The company provides comprehensive technical support to customers.
- Health and Safety Instructions
- Do not contact uncured sealant products with food or cosmetics; Uncured sealant should not come into contact with the skin for a long time;
- If the sealant accidentally enters the eyes, it must be immediately rinsed with a large amount of water and then checked by a doctor; Place the product out of reach of children.
- Pre test procedure
- In order to eliminate potential problems on site, Zhijiang samples various materials used for adhesives, determines the optimal adhesive used in advance, and develops the best surface preparation method to obtain the best adhesive performance. Please consult the technical personnel of Zhijiang for specific information.
The ZJ-900 universal MS sealant is packaged in 600ml aluminum plastic film soft packaging or 200kg iron bucket packaging. It can also be packaged according to customer requirements.
It is recommended to store in a cool and dry place for a storage period of 12 months.