Epoxy dry hanging adhesive
1. Dry hanging bonding of internal and external walls of stone, ceramics, etc;
2. Assembly, bonding, and marking of prefabricated components such as concrete, ceramics, stone, wood, etc;
3. Repair of cracks in concrete, stone, and other materials;
4. Positioning, reinforcement, and reinforcement of the structure.
Product features
1. Epoxy two component room temperature curing;
2. High adhesive strength, good thixotropy;
3. Good weather resistance, cold and hot shock resistance;
4. Water and chemical resistance;
5. It can bond various materials such as stone, ceramics, glass, metal, wood, etc.
| Project | Sample type/curing conditions | Performance index (MPa) | Reference standards |
| Tensile shear strength | Stainless Steel - Stainless Steel/Standard Conditions | ≥18 | JC 887-2001 Epoxy adhesive for dry hanging stone curtain walls |
| Compressive shear strength | Stone - Stone/Standard Conditions | ≥12 | |
| Stone - Stone/freeze-thaw cycles 50 times | ≥10 | ||
| Stone - Stainless Steel/Standard Conditions | ≥12 | ||
| Attribute | GM-602A | GM-602B | GM-602(After mixing well) |
Color (appearance) |
Grey paste | White paste | Pale |
| Density(g/cm³) | ~1.8 | ~1.8 | ~1.8 |
| Viscosity(PaS)* | 200~400 | 150~250 | Thixotropic |
| Effective operating time (23 ℃) | N/A | N/A | Within 20 minutes |
| Shelf life (10-40 ℃) | 1-2 years | 1-2 years | N/A |
- 1. When using, mix thoroughly and evenly according to the recommended proportion. Excessive deviation in proportion or uneven mixing may cause yellowing or partial contamination of the stone:
- 2. The epoxy resin and amine curing agents contained in this product are both chemicals. Safety precautions must be taken during construction to avoid eye or skin contamination. If skin contact occurs, timely wipe off pollutants and wash with water and soap; If eye contact occurs, rinse with clean water for 15 minutes. And seek medical attention in a timely manner;
- 3. To ensure construction safety, do not bear weight during the initial curing stage of the adhesive;
- 4. The recommended operating environment temperature for GM-602 is above 10 ℃. When the temperature is lower, it is recommended that users slightly heat the product before using it; Do not use in rainy or humid environments; 5. If you have any other questions, please contact the local distributor of the product or directly contact Zhijiang Company.
Packaging 1. Component A: 15kg, Component B: 15kg
Packaging 2. Component A: 9kg, Component B: 9kg
The separate storage period for the two components is 2 years. This product should be stored in a dry and ventilated place and promptly sealed after use.